Glue bus compressor
IMPACT Engine
One compressor. The whole group moves together.
Opens YouTube in a new tab.
What it does
One compressor. The whole group moves together.
IMPACT Engine is a stereo glue bus compressor for drums, synths, vocals or a whole mix.
Glue is one large knob, 0 to 10. Turn it up and the compressor listens partly to its own output, so it settles into the music and reacts less to individual peaks.
Release stretches on dense material such as pads and full mixes, and shortens on spiky material such as drums. The knee softens and a little analogue colour comes in. The ratio stays exactly where you set it.
At 0 it is a plain console-style compressor.
In detail
The parts worth knowing about
A meter with two faces
A lamp-lit analogue needle shows gain reduction from 0 to 20 dB.
Click it and it turns into a graph of input, output and gain reduction, beside the compression curve with a live dot on it.
Sidechain
Let another track drive it. Pick the source in Logic’s Side Chain menu or Live’s Audio From.
A high-pass filter keeps the kick from pumping the bus, and Listen lets you hear what the compressor hears. Delta plays only what the compressor is taking away, aligned so it lines up with the signal.
With an external key, Glue stops listening to its own output, since the bus is not what the detector hears. Its timing, knee and colour still apply.
The classic controls
Threshold, a ratio from 1.5:1 to 20:1 in eight steps, ten attack times from 0.1 to 30 ms, nine release times from 50 ms to 2 s or Auto, make-up gain, a knee from Auto to 12 dB, and a Range control that caps how much it can turn down. A ? button beside the gear turns on hints: rest the mouse on any control for a short explanation.
Drive, Mix and a limiter you can set
After the compressor sit Drive in three characters, oversampling at 2x or 4x (2x for new instances), and Mix for parallel compression. The output plate turns over to a limiter with its own ceiling, release, gain, and Clean or Soft clip.
54 presets
Drums 10, Synths and Pads 10, Vocals 5, FX 5, Mastering 10, Bass and Low End 10, and four Sidechain pumps from Breathe to Full Duck. Choosing a sidechain preset turns the external sidechain on. Save your own beside them.
Getting it running
In your DAW
Logic Pro
On an audio track, a drum bus or an instrument track, click an empty Audio FX slot, then Audio Units → Takt Audio Labs → IMPACT Engine. Choose Stereo, or Mono on a mono track.
The first time it opens, paste the licence key from the Takt Audio Labs email.
Ableton Live
In Settings → Plug-Ins, turn on Use VST3 Plug-In System Folders and rescan. In the browser sidebar click Plug-Ins rather than Audio Effects, open Takt Audio Labs, and drag IMPACT Engine onto an audio track or a drum bus.
If Audio Units are switched on in Live as well, it appears twice. They are the same plug-in and either one is fine.
Privacy and updates
Offline by default
No account, no cloud, no telemetry, no analytics. Nothing you make with IMPACT Engine is sent anywhere, and it works with your network switched off.1
How you get updates
When an update is available, IMPACT Engine tells you in its settings menu and points you back to this page. The download link in your key email always serves the current build.
Your licence carries across untouched, and a session written with one version opens in the next with every setting where you left it.
Hear it
Off and on, same loudness
Every pair is matched to within 0.1 LU, measured. A compressor that is a decibel louder will always sound better and tells you nothing, so these are not.
Drum bus, glue preset
Live drums
Synths
Full mix
Pad, sidechained to the kick
Launch price until 3 February 2027
Secure checkout by Polar
| Formats | Audio Unit, VST® 3 |
|---|---|
| System | macOS 11 or later, Apple Silicon and Intel |
| Installer | Signed and notarised by Apple |
| Latency | 50 samples (about 1 ms) at the default 2x oversampling, 60 at 4x, none with oversampling off. Always reported to your DAW |
| Windows | Mac only for now. Windows is planned |
| Licence | One purchase, up to three machines, moveable |
| Activation | With the key from the Takt Audio Labs email. No account, no ongoing checks |
| Updates | Announced in the plug-in when one is available |
| Support | support@taktaudiolabs.com |
How activation works. Your key email includes a licence key. Paste it into IMPACT Engine and it activates. Activating needs the internet, and so does releasing a machine from inside the plug-in. At no other time does it check your licence, so it works with the network off.
Until a key is entered, audio passes through untouched. Three machines per licence, and if you sell a Mac or a drive dies you can release the slot from inside the plug-in yourself.
- Once a day the plug-in asks taktaudiolabs.com whether a newer version exists. That is a request for a public file and carries nothing about you or your machine. If you are offline it doesn’t ask. Nothing else leaves your computer, and any network monitor will confirm it. Back to the text